|
|
Iscar Releases A Completely New Line Of Slitting Cutters Utilizing Tang-Grip Technology And The Sturdiness Of Sumo Tec Grades
Iscar now offers a family of high-performance slitting tools that incorporate the convenience and security of Tang-Grip clamping with the added durability of the brand new Sumo Tec insert grades.
The idea, already proven successful in Tang-Grip parting tools, has now been spread to slitting cutters. In the patented Tang-Grip clamping system, inserts are press-fit into their pockets accompanied by a special hand tool, and are gripped securely in place without the need for clamps, upper jaws or set screws that can weaken the insert and block chip flow. The pocket design uses cutting forces to hold the insert seated tightly in position, eliminating any chance of insert pull-out. The Tang-Grip clamping system also fosters more accurate slitting cuts plus longer pocket and insert life.
Iscar's Sumo Tec insert grades feature a special post-coating treatment which substantially boosts tool life and dependability.
Introduced in late '07, the new Sumo Tec treatment smooths the insert's coated surface to eradicate microscopic stress raisers, decrease heat and friction and improve chip flow. The result is improved toughness and opposition to chipping and built-up edge, all leading to greater tool life. The golden-colored flank on Sumo Tec inserts facilitates wear detection. Size for size, Tangslit cutters offer more teeth than Iscar's SGSF cutters, allowing higher feed rates.
Their higher rigidity leads to straighter, more accurate cuts and less vibration even in large-diameter cutters. The brand new Tangslit TGSF cutters come in 100 to 160 mm diameters, 3 and 4 mm widths and can accept the exact same selection of inserts as Tang-Grip parting tools. Additional sizes will be added.
Available Sumo Tec grades for Tangslit cutters include:
IC808, with a tough submicron substrate beneath a Sumo Tec TiAlN PVD coating, delivering superb resistance to impact loads and built-up edge. This grade is recommended for slitting heat resistant alloys, austenitic stainless steel, hard alloys and carbon steel.
IC830, giving increased toughness for heavier parting and grooving involving interrupted cuts. It is suitable for all stainless steel and high temperature alloys.
IC908, a hard, fine-grain substrate with exceptional chipping resistance, combined with a new Sumo Tec TiAlN PVD coating. It is perfect for nodular or grey cast iron.
IC928 and 928A, PVD TiAlN-coated tough grades suitable for stainless steel, high temperature alloys and other alloy steels. These grades are also recommended for interrupted cuts and heavy operations.
All Tangslit and Tang-Grip inserts are presented in J- or C-type chipformer geometries from Iscar.
Iscar Recently Made Public Several New Lines To Enlarge Their Family Of Milling Cutters
Iscar recently released a new family of High Speed Milling adjustable endmills and facemills that will improve milling of aluminum, non-metallics, cast iron and hardened steel. This should prove especially useful in the automotive and aerospace industries.
Revolutionary End Mills By Iscar Can Enhance Productivity While Decreasing Costs
Manufacturers and die & mold shops can banish chatter problems in numerous milling operations with Iscar's new Chatterfree end mills. The cutters' variable-pitch flute pattern eliminates harmonic vibration, the primary source of chatter. This enables faster cutting and finer finish in rough or finish slotting, shoulder milling and cavity milling.
Some Progressions Have Extended Iscar's Families Of Indexable Endmills For Heightened Productivity
Helido-Upfeed 04 Two years ago Iscar introduced the extremely efficient H600 indexable endmill line, based on conceptually new Helido-Upfeed double sided inserts with 6 cutting edges. The first insert launched was the H600 WXCU 0806..., which was designed for milling cutters in the diameter range of 50 to 125 mm.
A Couple Of Advancements In Carbide Inserts By Iscar Over The Years
Iscar is introducing a new unique milling system with tangential, clamped, butterfly-shaped LNKX carbide inserts. The butterfly-shaped insert has significant advantages compared to the current flat, square shapes. The new geometry has more cutting edges, positive rake face, reduced cutting forces resulting in higher performance.
Push Pull Testing For Highway Industry Supplying Calibrated Gauges. Stress Load Testing Procedures For On Site Evidence To Testing Demands.
Push Pull Testing for the Railway industry for proof of reliable anchor fixings. Calibrated push pull force gauges are used for stress load testing along with tensile strength pull testing procedures. Proof of load testing undertaken, measured, recorded in a reliable and standard way to BS5080 Part 1 standards.
Industrial Water Heater - Considering All Of Your Needs - Study Thoroughly To Know A Lot More
Looking into a commercial water heater? Then you have a few things that you must consider. Take a look at these areas to avoid making a mistake with the wrong unit.
Commercial Water Heater- Which Is Perfect For Your Necessities
If you are in the market for a commercial water heater then consider what the needed application is and your overall cost to determine which is best for you. Since there are so many to choose from you may have to do some calculating in order to match the need.
|
More Articles
Blogroll
|
